Small Charater Dual Line Ink Jet Printer Pump

Product Description

TOPSFLO gear pumps were developed specifically to handle abrasive, pigmented inks. Precise
flow and pressure requirements are driven by the design of the printheads. TOPSFLO pumps
deliver a pulseless flow which is key to preventing issues in print quality and drop placement
accuracy.

 

 

Product
MJ200WI Series	MG300MD Series	MG300WI Series
Continuous Inkjet Printer  Pumps	Continuous Inkjet Printer  Pumps	Continuous Inkjet Printer  Pumps

 

Magnetically Driven Gear Pump Advantages

1.Flow Rate
·0.1 to 6.5L/min flow rates
·PWM/5V variable speed control, FG signal feedback
2.Designed for Abrasive, Pigmented Inks
·Life test results for abrasive white inks well
3.Leak Free Operation
·Magnetic drives eliminate dynamic shaft seals, no leaks
4.Compact design, manifold mounting
5.No"wavy" print(due to rotating part precision/balance)
6.Low Power& High effiency
7.Customization Specialfor You
·TOPSFLO support all-around pump customization from
motorelectronicstructural parts

 

Model	Rated Volatage (VDC)	Max Pressure (Bar)	Max Flow Rate (ml/min)	Inlet/Outlet  Diameter	ml/rpm (reference  3500RPM)	Lifetime (Hoers)
MJ205XK/ DC24W-0.3	24	5	200-1500	G1/8"	0.33	10000
MJ213XK/ DC24WI-0.9	24	3	500-4500	G1/4"	94	10000
MG317XKDC24WI	24	10	6500	G1/4"	1.5	8000
TMG317XKDC24DM	24	8	6000	G1/4"	1.5	20000
Note: 1.Gear type : "XK"for common fluid,"YT"for fluid with rigid particles,"PK"for acid and alkali 2.Valve: "L"limited pressure valve,"R"non return valve      3.Speed control methods : standard 0~5v,PWM customized    4.High temperature fluid : "H"for 50-100ºC    5.Lead wire: Red: 24v,Black: negative pole,Brown: 0~5v,Blue: FG signal line

Operation

Figure 1. below shows a simplified version of a typical ink supply system for a printer with recirculating inkjet
printheads.Filtering and heating elements have been omitted from the diagram, but it should be pointed out
that pulse dampeners are typically not required when gear pumps are used. Pumps A & B control the flow
through the printheads and the pressure at the inlet and outlet manifold. Adequate flow should be maintained,
as recommended by the printhead manufacturer, to assure removal of particles and air bubbles blocking
printheadnozzles, and to assure the ink is homogeneous and at constant temperature.

Ink Supply System for Recirculating Inkjet Printheads
 

System Requirements
Precise flow and pressure requirements are driven by the design of the printheads. In "Drop On Demand"
inkjet printing, ink drops are ejected from a printhead "on demand" by one of a variety of physical processes,
often using piezoelectric materials to force ink from the printhead. Between drops the ink is held in a nozzle by
surface tension forces, forming a meniscus. The stability of the meniscus is important to drop placement
accuracy and the resulting print quality. Any pulsation in the recirculating ink stream can result in an unstable
meniscus, thus a pulseless flow is very important.

 

Typical Application

Industrial digital printing, DOD and CIJ printing
Wide-format printing
Packaging printing
Decorative printing on ceramics, glass, wood
Metal and plastic
Labelling, marking
Textile printing
Ceremic printing

Diaphragm Pumps for Inkjet Printer

TOPS INDUSTRY AND TECHNOLOGY CO., LIMITED started in 2005, is the world's leading supplier of micro pump
solutions,and won the "National Hightech Enterprise".  The company is mainly engaged in the research and development
and manufacture of miniature brushless DC pumps and miniature diaphragm pumps.80% of the products are exported to
high-end markets in Europe and America, and are mainly used in New energy, Home applicances, Industrial,Medical,
Automotive, other circulation systems, etc. The company has always been known for its high  quality and high batch
consistency, and has established solid and good cooperative relations with many world-renowned brands, such as:
Tesla, Whirlpool, Flextronics, Kohler, GE, Roca, KTM, Geberit, etc.

Get more detail, please contact us: